BWU2849 - Modular Speed Monitor
Артикул: BWU2849
Наименование: Modular Speed Monitor
Производитель: Bihl-Wiedemann
|
|
Product description For sine/cosine, SSI and TTL encoder 2 x fast electronic safe outputs Monitoring up to 2 independent axes Chip card Technical data | Type | Speed Monitor Modular | | Model | Speed Monitor for encoders | Protection rating IP20:
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water. IP40: Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.
IP54: Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
IP65:
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.
IP67:
Dust-tight, full protection against contact, protection against temporary immersion. | IP20 | | Safe Monitoring | speed + position | | Encoder signal/Sensor signal | sine/cosine, TTL, SSI | | Number of monitored axes | up to 2 independent axes | | Inputs Safety, SIL 3, Cat. 4 | - | | Outputs Safety, SIL 3, cat. 4 | 2 release circuits, 2 x fast electronic safe outputs | | Encoder/Sensor connection | RJ45 | Diagnostic and configuration interface USB:
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface.
Ethernet fieldbus
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface.
Ethernet fieldbus + Ethernet diagnostic:
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface.
Ethernet diagnostic:
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface.
Ethernet diagnostic + Modbus TCP diagnostic:
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor.
Ethernet fieldbus + RS 232: Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
RS 232:
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the Downloads section of the respective device. | via AS-i | AS-i connection the connection to AS-i as well to AUX (auxiliary 24 V power) is made via yellow resp. black AS-i profile cable with piercing technology or via M12 socket (in IP20 via clamps). | clamps | AS-i address AB Slave (max. 62 AB Slaves/AS-i network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/AS-i network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address 0.
Upon request, slaves are available with specific AS-i Slave profiles. | depending on configuration |
|
Назад в раздел
|
