BWU2270 - AS-i Safety Input Module (M12), IP67
Артикул: BWU2270
Наименование: AS-i Safety Input Module (M12), IP67
Производитель: Bihl-Wiedemann
|
|
Product description The substructure module is not included in the scope of delivery. Technical data | Type | IP67, 4 x M12, Safety | | Housing | 4 x M12 | Protection rating IP20:
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water. IP40: Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.
IP54: Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
IP65:
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.
IP67:
Dust-tight, full protection against contact, protection against temporary immersion. | IP67 | | Inputs Safety, SIL 3, Cat. 4 | 1 x 2 channels | Inputs digital, EDM An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | - | | Outputs Safety, SIL 3, cat. 4 | - | | Outputs digital | 2 x electronic | | Safety signal inputs | optoelectronic protective devices | Input voltage (sensor supply) inputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, inputs shall not be connected to earth or to external potential. | out of AUX | Output voltage (actuator supply) Electronic outputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, outputs shall not be connected to earth or to external potential. For relay outputs the relay contacts are initiated from AS-i. The load circuit is powered externally as specified in the data sheet. | out of AUX | | Length of connector cable | unlimited | | PCB connection |
Назад в раздел
|
|
