BWU2956 - AS-i Slave for SEW frequency inverters

Àðòèêóë: BWU2956
Íàèìåíîâàíèå: AS-i Slave for SEW frequency inverters
Ïðîèçâîäèòåëü: Bihl-Wiedemann





Product description

With M12 sockets, protection category IP67

Easy triggering of fixed frequencies

AS-i via M12

Technical data

Type IP67, 4 x M12
Housing 4 x M12
Protection rating

IP20:
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


IP40:

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

IP54:

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


IP65:
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

IP67:

Dust-tight, full protection against contact, protection against temporary immersion.

IP67
Drive

SEW MOVIMOT®:

Motor module to control geared motors with frequency inverters.

SEW MOVI-SWITCH® 1E:

Motor module to control motor starters MOVI-SWITCH® 1E.

SEW MOVI-SWITCH 2S, Lenze Smart Motor:

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

Lenze Smart Motor:

Motor module to control Lenze Smart motors and to control additional sensors.

Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP):

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

Interroll (EC310), RULMECA (RDR BL-2):

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

Interroll (EC200, EC300), Rollex (Typ 840):

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP):

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

SEW MOVIMOT
Number of Drives 1
Line protection fuse

yes, separatly for each motor, 3,5 A (slow-blow fuse):

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the fuse the module is no longer functional and needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one, without short circuit the robust behavior of the module remains.


no:

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

no
Flat design, installation in cable duct possible

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

no
Inputs digital 2
Outputs digital -
Outputs analog -
Input voltage (sensor supply)

inputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, inputs shall not be connected to earth or to external potential.

out of AUX
Output voltage (actuator supply)

Electronic outputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from AS-i. The load circuit is powered externally as specified in the data sheet.

-
Connection

PUR line, oil ans abrasion resistant, appropriate for conveyor chains. Further connection options are available on request.

M12 socket M12 cable socket, angled M12 cable socket, straight M8 cable socket, straight round cable/connecting wires profile cable branch push in terminals
2 x round cables/connecting wires 2,5 mm²


Íàçàä â ðàçäåë