ГлавнаяКаталогАвтоматизация3RKIndustrial Communication
 

AS-I DATA DECOUPL 1 X 4A SPRING AS-INTERFACE SINGLE DATA DECOUPLING UNIT, IP20, SLIMLINE S22.5 SPRING-LOADED TERMINALS, MODULE WIDTH 22.5 MM, IN: 24 V / 30 V DC OUT: 1 X AS-I, 4 A INTEGR. OVERLOAD PROTECTION, INTEGR. EARTH FAULT DETECTION, SIGNALING CONTA

Артикул: 3RK1901-1DG12-1AA0
Наименование: AS-I DATA DECOUPL 1 X 4A SPRING AS-INTERFACE SINGLE DATA DECOUPLING UNIT, IP20, SLIMLINE S22.5 SPRING-LOADED TERMINALS, MODULE WIDTH 22.5 MM, IN: 24 V / 30 V DC OUT: 1 X AS-I, 4 A INTEGR. OVERLOAD PROTECTION, INTEGR. EARTH FAULT DETECTION, SIGNALING CONTACT, REMOTE RESET (siemens)
Производитель: Siemens


Наименование продукта
AS-I DATA DECOUPL 1 X 4A SPRING AS-INTERFACE SINGLE DATA DECOUPLING UNIT, IP20, SLIMLINE S22.5 SPRING-LOADED TERMINALS, MODULE WIDTH 22.5 MM, IN: 24 V / 30 V DC OUT: 1 X AS-I, 4 A INTEGR. OVERLOAD PROTECTION, INTEGR. EARTH FAULT DETECTION, SIGNALING CONTACT, REMOTE RESET
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2010-10-01
    Версия от 2012-02-15
 
AS-I DATA DECOUPL 1 X 4A SPRING AS-INTERFACE SINGLE DATA DECOUPLING UNIT, IP20, SLIMLINE S22.5 SPRING-LOADED TERMINALS, MODULE WIDTH 22.5 MM, IN: 24 V / 30 V DC OUT: 1 X AS-I, 4 A INTEGR. OVERLOAD PROTECTION, INTEGR. EARTH FAULT DETECTION, SIGNALING CONTACT, REMOTE RESET
 
General technical data:
product brand name   AS-Interface
product designation   Single data decoupling module
Design of the product   SlimLine S22.5 - Module to beused in the IP20 control cabinet
Protection class IP   IP20
Installation altitude / at a height over sea level / maximum m 2,000
Ambient temperature    
  • during storage
 °C -40… +85
  • during operating
 °C -25… +70
Relative humidity / at 25 °C / during operating / maximum % 70
Item designation / according to DIN 40719 extendable after IEC 204-2 / according to IEC 750   A
Item designation / according to DIN EN 61346-2   A
Active power supplied W 120
Mechanical operating cycles as operating time / of the signal contacts / typical   1,000,000
Product function    
  • self-reset
   No
  • reset external
   Yes
  • manual RESET
   Yes
  • short-circuit to earth recognition
   Yes
  • test function of signaling contacts
   Yes
  • adapted for grounded AS-i networks
   Yes
  • adapted for non-grounded AS-i networks
   Yes
  • adapted for AS-i Power24V
   Yes
  • sequential connected time-delay
   Yes
  • AS-interface data decoupling
   Yes
Reset function   yes
Adjustable response current    
  • of the current-dependent overload release
 A 2.5… 4
Number of electrical connections / for alarm contact   2
Number of outputs / for AS Interface / maximum   1
Type of display / as status display by LED   yes
Number of switching contacts / as make contact / for reporting function   1
Design of the switching contact / as make contact / for reporting function   yes
Response delay time / of the sequential switch-in delay ms 200
 
Communication:
    
Protocol / will be supported / AS interface protocol   Yes
 
Auxiliary circuit:
    
Operating current / of the auxiliary contacts    
  • at AC-15 / at 24 V
 A 3
  • at DC-13 / at 24 V
 A 1
 
Ein- und Ausg?nge:
    
Type of voltage    
  • of the input voltage
   DC
Characteristic feature of the output / short-circuit protected   Yes
Output voltage    
  • 1 / for DC / rated value
 V 30
  • 1 / for DC
    
  • rated value
 V 20.5… 31.6
  • 2 / for DC / rated value
 V 24
Output current / for DC / maximum A 4
Input voltage    
  • 1 / for DC / rated value
 V 30
  • 1 / for DC
    
  • rated value
 V 21… 32
  • 2 / for DC / rated value
 V 24
Input current / for DC / maximum A 4.1
 
Short-circuit:
    
Design of the short-circuit protection   electronic
 
Einbau/Befestigung/Abmessungen:
    
Built in orientation   vertical
Type of mounting   35-mm DIN rail mounting or wall mounting with plug-in flaps
Width mm 22.5
Height mm 104.9
Depth mm 121.2
Design of the electrical connection / for auxiliary and control current circuit   spring-loaded terminals
Product function / removable terminal for auxiliary and control circuit   Yes
Type of the connectable conductor cross-section    
  • for auxiliary contacts
    
  • solid
   2x (0.25 ... 1.5 mm?)
  • finely stranded
    
  • with conductor end processing
   2x (0.25 ... 1.5 mm?)
  • without conductor final cutting
   2x (0.25 ... 1.5 mm?)
  • for AWG conductors / for auxiliary contacts
   2x (24 ... 16)
Verification of suitability   CE / UL / CSA
Acceptability for application / safety-related circuits   Yes
 
Certificates/approvals:
    
General Product Approval other
  
 
last change:
Dec 14, 2011

Назад в раздел