SIMATIC DP, 1 ELECTRON. MODULE ET 200S: 4DI DC 24V NAMUR, 15 MM WIDTH, WITH LED SF (GROUP FAULT),

Артикул: 6ES7131-4RD02-0AB0
Наименование: SIMATIC DP, 1 ELECTRON. MODULE ET 200S: 4DI DC 24V NAMUR, 15 MM WIDTH, WITH LED SF (GROUP FAULT), (siemens)
Производитель: Siemens


Наименование продукта
SIMATIC DP, 1 ELECTRON. MODULE ET 200S: 4DI DC 24V NAMUR, 15 MM WIDTH, WITH LED SF (GROUP FAULT),
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2002-12-15 2010-10-15 2010-10-15
Manuals weitere>>
ET 200S Distributed I/O System  2004-09-14
SIMATIC DP, 1 ELECTRON. MODULE ET 200S: 4DI DC 24V NAMUR, 15 MM WIDTH, WITH LED SF (GROUP FAULT),
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from supply voltage L+, max. Dependent on encoder
Encoder supply
Number of outputs 1
Output voltage min. 8.2 V, loaded
Output current, rated value 45 mA
Output current
Short-circuit protection Yes; Electronic
Power losses
Power loss, typ. 1.6 W
Address area
Address space per module
with packing 4 bit
without packing 1 byte
Digital inputs
Number/binary inputs 4
Number of NAMUR inputs 4
Parallel switching of inputs No
Number of simultaneously controllable inputs 4
Input voltage
Type of input voltage DC
Input current
for 10 k switched contact
for signal "0" 0.35 to 1.2 mA
for signal "1" 2.1 to 7 mA
for unswitched contact
for signal "0", max. (permissible quiescent current) 0.5 mA
for signal "1" typ. 8 mA
for NAMUR encoders
for signal "0" 0.35 mA to 1.2 mA
for signal "1" 2.1 to 7 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max. 4.6 µs
at "1" to "0", max. 4.6 µs
Cable length
Cable length, shielded, max. 200 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes; adjustable
Hardware interrupt No
Diagnostic messages
Diagnostic functions Yes; Diagnostic alarm
Diagnostic information readable Yes
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital input (green) Yes; per channel
Galvanic isolation
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus Yes
between the channels and the load voltage L+ Yes
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weight
Weight, approx. 35 g
Status Mar 12, 2012
Оборудование снято с производства, прямой заменой является:
Part number:6ES7131-4RD02-0AB0
Notes:

Назад в раздел