Product type designation | SCALANCE W788-2PRO |
| IWLAN DUAL ACCESS POINT SCALANCE W788-2PRO, FOR USE OUTSIDE OF USA 2 RADIO INTERFACES, IEEE 802.11B/G/A/H, INDUSTRIAL WIRELESS LAN (IWLAN) 2.4/5 GHZ, UP TO 54MBIT/S, WPA2/802.11I/11E, NOTE NATIONAL APPROVALS, POE, IP65(-20-+60 DGR C), EN50155, SCOPE OF SUPPLY:2XANT 795-4MR, IP67 HYBRID-PLUG CONNECTOR, MOUNTING MAT., MAN. ON CD ROM GERMAN/ ENGLISH; |
Transmission rate | |
Transfer rate | |
| 54 Mbit/s |
| 10… 100 Mbit/s |
| Due to the simultaneous use of several radio channels, a transmission rate of 108 Mbit/s is possible (turbo mode) |
Interfaces | |
Number of electrical connections | |
- for network components and terminal equipment
| 1 |
| 1 |
- for redundant power supply
| 1 |
Design of electrical connection | |
- for network components and terminal equipment
| Hybrid socket, RJ45 integrated |
| M12 interface (4-pole, A-coded), hybrid socket, PoE |
design of the removable storage / C-PLUG | Yes |
Interfaces / wireless | |
Number of radio cards / permanently installed | 2 |
Number of electrical connections / for external antenna(s) | 4 |
Design of the electrical connection / for external antenna(s) | R-SMA female (socket) |
Supply voltage, current consumption, power loss | |
Type of voltage / of supply voltage | DC |
Supply voltage | |
- 1 / from M12 Power Connector (A-coded) for redundant power supply
| 24 V |
- 2 / from M12 Power Connector (A-coded) for redundant power supply
| 48 V |
- from Power-over-Ethernet according IEEE802.3at for type 1 and IEEE802.3af
| 48 V |
Current consumed | |
- at 24 V / with DC / typical
| 0.295 A |
- at 48 V / with DC / typical
| 0.15 A |
- with Power-over-Ethernet according to IEEE802.3at for type 1 and IEEE802.3af / typical
| 0.15 A |
Active power loss | |
- at 24V / for DC / typical
| 7 W |
- at 48 V / with DC / typical
| 7 W |
- with Power-over-Ethernet according to IEEE802.3at for type 1 and IEEE802.3af / typical
| 7 W |
Permitted ambient conditions | |
Ambient temperature | |
| -20… +60 °C |
| -40… +70 °C |
| -40… +70 °C |
Relative humidity / at 25 °C / without condensation / during operating / maximum | 100 % |
Protection class IP | IP65 |
Ambient condition / for (standard) operation mode | When used under hazardous conditions (Zone 2), the SCALANCE W788-xPRO/RR or W74x-1PRO/RR product must be installed in an enclosure. To comply with EN 50021, this enclosure must meet the requirements of at least IP 54 in compliance with EN 60529. |
Design, dimensions and weight | |
Width / of enclosure / without antenna | 125 mm |
Height / of enclosure / without antenna | 88 mm |
Depth / of enclosure / without antenna | 108 mm |
Net weight | 1.05 kg |
Type of mounting | |
| Yes |
| Yes |
Wireless frequencies | |
Radio frequency | |
- for WLAN in 2.4 GHz frequency band
| 2.41… 2.48 GHz |
- for WLAN in 5 GHz frequency band
| 4.9… 5.8 GHz |
Product properties, functions, components / general | |
Number of SSIDs | 16 |
Product function | |
| No |
| No |
| No |
| No |
Number of iPCF-capable radio modules | 0 |
Product functions / management, configuration | |
Number of manageable IP addresses / in client | 8 |
Product function | |
| Yes |
| Yes |
| Yes |
| Yes |
- Configuration with STEP 7
| Yes |
- configuration with STEP 7 in the TIA Portal
| Yes |
| Yes |
- operation with IWLAN controller
| No |
- operation with Enterasys WLAN controller
| No |
| Yes |
- forced roaming with IWLAN
| Yes |
| Yes |
Protocol / is supported | |
- Address Resolution Protocol (ARP)
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
|