HRS100 Series Hall-effect rotary position sensor, slotted shaft, straight solder lug, 180°electrical angle || HRS100SSAB180
Àðòèêóë: HRS100SSAB180
Íàèìåíîâàíèå: HRS100 Series Hall-effect rotary position sensor, slotted shaft, straight solder lug, 180°electrical angle || HRS100SSAB180
Ïðîèçâîäèòåëü: Honeywell
|
|
The HRS100 Series uses Hall-effect technology to provide angular position information. The use of magnetically coupled information, in place of a mechanical wiper assembly, provides long life and a cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt. The HRS100 Series is packaged in a metal housing with a 9,5 mm [0.375 in] diameter bushing and a 6,35 mm [0.25 in] diameter slotted shaft. Termination is either solder lug or flying wire leads. - Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
- Choice of termination: Provides application flexibility
- 10 M cycle product life (typical): Provides long life in the application
| Transportation: - Position and movement detection of pedals, throttles, gear shift, levers, steering, linkages, and hitches (off-road vehicles and industrial/ construction/agricultural vehicles/equipment)
- Tilt/trim position (boat engines)
Industrial: - Material handling equipment (forklifts, robotics)
| Product Specifications | Package Type | stainless steel shaft and brass bushing | Supply Voltage | 5 Vdc ± 10% | Output Type | sink/source 2 mA | Termination Type | straight solder lug | Operating Temperature | -40 °C to 85 °C [-40 °F to 185 °F] | Storage Temperature | 105 °C [221 °F] max. | Output Voltage | 5 % to 95 % of applied Vdd, approx (programmable) | Linearity (% of Span) | ± 2% | Mechanical Angle of Rotation | 180 ° ±2° | Output Current (max.) | 2 mA max. | Bushing Type | 9.52 mm [0.375 in] FMS, excludes C-ring | Rotational Cycles | 10 million | Rotational Torque | 0.014 N m [2.0 in oz] (max. at 25 °C) | Stop Torque | 0.56 N m [5 in lb] | Push Out | 9.1 kg [20 lb] min. | Pull Out | 4.5 kg [10 lb] min. | Overvoltage Protection | 18 Vdc max. | EMI | 30 V/m, 10 kHz to 1000 MHz at 3 m | Series Name | HRS100 |
|
Íàçàä â ðàçäåë
|