Product Description |
EtherNet/IP Gateway with integrated safety monitor, double master for 2 AS-Interface networks |
General specifications |
AS-Interface specification | V3.0 |
Duplicate address detection | from AS-Interface slaves |
Earth fault detection | integrated |
EMC monitoring | integrated |
Diagnostics function | Extended function via display |
Switch-on delay | < 10 s |
Response delay | < 40 ms |
UL File Number | E223772 |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 3 |
Performance level (PL) | PL e |
MTTFd | 200 a |
B10d | 2 E+7 |
Indicators/operating means |
Display | Illuminated graphical LC display for addressing and error messages |
LED ETHERNET | Ethernet detected; LED green |
LED AS-i ACTIVE | AS-Interface operation normal; LED green |
LED CONFIG ERR | configuration error; LED red |
LED PRG ENABLE | autom. programming; LED green |
LED POWER | voltage ON; LED green |
LED PRJ MODE | projecting mode active; LED yellow |
LED U AS-i | AS-Interface voltage; LED green |
LED AUX | ext. auxiliary voltage UAUX ; LED green |
LED EDM/Start | External device monitoring circuit inputs closed, 4x yellow LEDs |
LED output circuit | Output circuit closed; 4 x green LEDs |
Button | 4 |
Electrical specifications |
Insulation voltage | ≥ 500 V |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface; Output K3 and K4 24 V DC |
Rated operating current | ≤ 300 mA off AS interface network 1 ≤ 300 mA off AS interface network 2 ≤ 370 mA in total |
Interface |
Interface type | RJ-45 |
Protocol | EtherNet/IP |
Transfer rate | 10 MBit/s ... 100 MBit/s , Automatic baud rate detection |
Interface 2 |
Interface type | Chip card slot |
Interface 3 |
Interface type | RS 232, serial |
Input |
Number/Type | 4 EDM/Start inputs: EDM: Inputs for the external device monitoring circuits Start: start inputs: Static switching current 4 mA at 24 V, dynamic 30 mA at 24 V (T=100 μs) |
Output |
Safety output | Output circuits 1 and 2: 2 potential-free contacts, max. contact load: 3 ADC-13 at 30 VDC, 3 AAC-15 at 30 VAC Output circuits 3 and 4: 2 PNP transistor outputs max. contact load: 0.5 ADC-13 at 30 VDC |
Connection |
Ethernet | RJ-45 |
AS-Interface | spring terminals, removable |
Compliance with standards and directives |
Directive conformity | |
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007 |
Standard conformity | |
| Shock and impact resistance | EN 61131-2:2004 |
Ambient conditions |
Ambient temperature | 0 ... 55 В°C (32 ... 131 В°F) |
Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Mechanical specifications |
Protection degree | IP20 |
Material | |
| Housing | Stainless steel |
Mass | 860 g |
Construction type | Low profile housing , Stainless steel |