| Product Description |
G2 flat module
4 inputs (NPN) |
| General specifications |
| Slave type | A/B slave |
| AS-Interface specification | V2.1 |
| Required master specification | ≥ V2.0 |
| UL File Number | E87056 |
| Indicators/operating means |
| LED FAULT | error display; LED red
red: communication error or address is 0
red flashing: overload of sensor supply |
| LED PWR | AS-Interface voltage; LED green |
| LED IN | switching state (input); 4 LED yellow |
| Electrical specifications |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current | ≤ 40 mA (without sensors) / max. 240 mA |
| Protection class | III |
| Input |
| Number/Type | 4 inputs for 2- or 3-wire sensors (NPN), DC
alternative 2 inputs for 4-wire sensors (NPN), DC |
| Supply | from AS-Interface |
| Voltage | 21 ... 31 V |
| Current loading capacity | ≤ 200 mA (TB ≤ 40 В°C),
≤ 150 mA (TB ≤ 60 В°C), overload-proof and short-circuit protected |
| Input current | ≤ 8 mA (limited internally) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| 0 (unattenuated) | ≤ 2 mA |
| 1 (attenuated) | ≥ 4 mA |
| Programming instructions |
| Profile | S-0.A.2 |
| IO code | 0 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | 2 |
| Data bits (function via AS-Interface) | input output |
| D0 | IN1 - |
| D1 | IN2 - |
| D2 | IN3 - |
| D3 | IN4 - |
| Parameter bits (programmable via AS-i) | function |
| P0 | not used |
| P1 | not used |
| P2 | not used |
| P3 | not used |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 50295:1999 |
| Standard conformity | |
| Noise immunity | EN 61000-6-2:2005 , EN 50295:1999 , EN 61326-1:2006 , IEC 62026-2:2008 |
| Emitted interference | EN 50295:1999 |
| AS-Interface | EN 50295:1999 |
| Input | EN 61131-2 |
| Protection degree | EN 60529 |
| Ambient conditions |
| Ambient temperature | -25 ... 60 В°C (-13 ... 140 В°F) |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Mechanical specifications |
| Protection degree | IP67 according to EN 60529 |
| Connection | cable piercing method
flat cable yellow
inputs: M12 round connector |
| Material | |
| Housing | PBT |
| Mass | 100 g |
| Mounting | Mounting base |
