AS-Interface power supply | VAN-115/230AC-K24
Артикул: VAN-115/230AC-K24
Наименование: AS-Interface power supply | VAN-115/230AC-K24
Производитель: Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com
8 A output load 115 V AC / 230 V AC switchable SELV LED operating display AS-Interface data decoupling Power factor correction Electronic overload protection and display
Datasheet as PDF in following languages:
Technical Data: VAN-115/230AC-K24 Product Description AS-Interface power supply General specifications UL File Number E223176 Functional safety related parameters MTTFd 40 a Mission Time (TM ) 10 a Diagnostic Coverage (DC) 0 % Indicators/operating means Power selection switch changeover switch for 115 V AC/230 V AC LED Overload Red LED, flashing LED PWR LED green Electrical specifications Fusing 6.3 AT Capacity factor approx. 0.62 (Depending on input voltage) Rated operating voltage Nominal: 115 V AC/230 V AC (selectable on front) Permitted: 90 to 132 V AC/190 to 265 V AC Rated operating current 4.0 A (115 V switch position) 1.9 A (230 V switch position) Supply frequency 47 ... 63 Hz Efficiency approx. 87 % Output Current limit approx. 8.5 A Current 8 A Voltage 29.5 ... 31.6 V DC Standard conformity Electromagnetic compatibility EN 55011, EN 50082-1, EN 61000-6-2 AS-Interface EN 50295 Standards Harmonic waves: EN 61000-3-2 Class A Interference suppression: EN 55022, EN 55011 Class B Electrostatic discharge (ESD): IEC 61000-4-2 (8 kV contact discharge, 15 kV air discharge) Electromagnetic fields: IEC 61000-4-3 (EN 61000-4-3) Burst: IEC 61000-4-4 (4 kV input, 2 kV output/capacitively coupled) Surge: IEC 61000-4-5 (4 kV asymmetrical, 4 kV symmetrical) Conducted interference: IEC 61000-4-6 (10 V, 150 kHz to 80 MHz) Ambient conditions Ambient temperature -10 ... 55 В°C (14 ... 131 В°F) with free convection Storage temperature -25 ... 85 В°C (-13 ... 185 В°F) Mechanical specifications Protection degree IP20 Protection class I, Protective conductor connection necessary Connection Connection terminals, max. conductor cross-section 0.5 to 2.5 mm2 Stripping length 5 to 6 mm Mass approx. 1200 g Mounting DIN mounting rail
Назад в раздел