Ethernet DeviceServer | RTS 4P DB9
Артикул: RTS 4P DB9
Наименование: Ethernet DeviceServer | RTS 4P DB9
Производитель: Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com
Two Ethernet connectors with built in hub Converts an RS 232, RS 422, or RS 485 device to Ethernet TCP/IP Metal housing Web-based configuration Modbus/TCP protocol integrated Port Mirroring
Datasheet as PDF in following languages:
Technical Data: RTS 4P DB9 Product Description Ethernet DeviceServer General specifications Description Connects up to 4 serial devices to ethernet Includes special firmware to run IDENT I System P read heads, IPT... Special firmware supports Modbus/TCP Number of read/write heads Indicators/operating means LED Tx Green: Data being transmitted LED PWR LED solid: Has power and has completed boot cycle LED blinking: booting up LED Link/Act Red: Working ethernet connection LED 100 MBit Red: transfer rate 100 MBits/s Off: transfer rate 10 Mbit/s Electrical specifications Rated operating voltage 5 ... 30 V DC , 110 / 220 Power Supply included with delivery Current consumption 200 mA Power consumption 4.8 W Interface Connection of Ethernet Physical 2 x RJ-45: Ethernet RJ-45 connector Protocol SMTP HTTP TCP/IP MODBUS/TCP Transfer rate 10 MBit/s or 100 MBit/s Interface 2 Interface type RS 232, RS 485, RS 422 Physical 4 x 9-pin Sub-D connector Protocol ASCII Transfer rate 300 Bit/s ... 230.4 kBit/s Ambient conditions Ambient temperature -37 ... 74 В°C (-34.6 ... 165.2 В°F) Storage temperature -40 ... 85 В°C (-40 ... 185 В°F) Climatic conditions air humidity max. 5 ... 95 % Mechanical specifications Protection degree IP20 Material Housing Metal sheet (steel), black-coated Installation panel mounting Mass approx. 3211 g
Назад в раздел