Inductive sensor | NCN50-FP-N0-P4-V1

Артикул: NCN50-FP-N0-P4-V1
Наименование: Inductive sensor | NCN50-FP-N0-P4-V1
Производитель: Pepperl-Fuchs

General specifications
Switching element function		NAMUR, NC
Rated operating distance		50 mm
Installation		non-flush
Output polarity		NAMUR
Assured operating distance		0 ... 40.5 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.35
Reduction factor r₃₀₄		0.8
Nominal ratings
Installation conditions
	A	40 mm
	B	150 mm
	F	240 mm
Nominal voltage		8.2 V (R_i approx. 1 kΩ)
Switching frequency		0 ... 80 Hz
Hysteresis		0 ... 5 typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		yes
Current consumption
	Measuring plate not detected	≥ 3 mA
	Measuring plate detected	≤ 1 mA
Switching state indication		LED, yellow
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
	Electromagnetic compatibility	NE 21:2007
Approvals and certificates
FM approval
	Control drawing	116-0165F
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 100 В°C (-13 ... 212 В°F)
Storage temperature		-40 ... 100 В°C (-40 ... 212 В°F)
Mechanical specifications
Connection type		Connector M12 x 1 , 4-pin
Housing material		PBT/metal
Sensing face		PBT
Protection degree		IP67
General information
Use in the hazardous area		see instruction manuals
	Category	1G; 2G; 1D

Назад в раздел