Inductive sensor | NJ1,5-8GM-N-V1
Артикул: NJ1,5-8GM-N-V1
Наименование: Inductive sensor | NJ1,5-8GM-N-V1
Производитель: Pepperl-Fuchs
|
|
- 1.5 mm flush
- Usable up to SIL2 acc. to IEC 61508
Datasheet as PDF in following languages: Technical Data: NJ1,5-8GM-N-V1| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 1.5 mm | | Installation | flush | | Output polarity | NAMUR | | Assured operating distance | 0 ... 1.215 mm | | Reduction factor rAl | 0.4 | | Reduction factor rCu | 0.3 | | Reduction factor r304 | 0.85 | | Nominal ratings | | Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | | Switching frequency | 0 ... 5000 Hz | | Hysteresis | 1 ... 10 typ. 5 % | | Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | FM approval | | | Control drawing | 116-0165F | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Housing material | Stainless steel 1.4305 / AISI 303 | | Sensing face | PBT | | Housing diameter | 8 mm | | Protection degree | IP67 | | General information | | Use in the hazardous area | see instruction manuals | | Category | 2G |
|
Назад в раздел
|
