Inductive sensor | NJ1,5-F2-E2-V1
Артикул: NJ1,5-F2-E2-V1
Наименование: Inductive sensor | NJ1,5-F2-E2-V1
Производитель: Pepperl-Fuchs
|
|
- 1.5 mm with switching tappet
- 3-wire DC
Datasheet as PDF in following languages: Technical Data: NJ1,5-F2-E2-V1| General specifications | | Switching element function | PNP NO | | Rated operating distance | 1.5 mm | | Installation | flush | | Output polarity | DC | | Assured operating distance | 0 ... 1.215 mm | | Nominal ratings | | Operating voltage | 10 ... 30 V DC | | Switching frequency | 0 ... 1000 Hz | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 3 V | | Operating current | 0 ... 200 mA | | No-load supply current | ≤ 15 mA | | Switching state indication | LED, red | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Housing material | PA | | Protection degree | IP67 | | Note | Use a stop screw combined with a model -F2 sensor from Pepperl+Fuchs GmbH.
The maximum actuation speed of the control slide is 0.1 m/s |
|
Назад в раздел
|
