Inductive sensor | NJ1,5-F2-E2-V3

Артикул: NJ1,5-F2-E2-V3
Наименование: Inductive sensor | NJ1,5-F2-E2-V3
Производитель: Pepperl-Fuchs

General specifications
Switching element function		PNP NO
Rated operating distance		1.5 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 1.215 mm
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		1000 Hz
Hysteresis		typ. 5%
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 15 mA
Switching state indication		LED, red
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
Ambient conditions
Ambient temperature		-25 ... 70 В°C (-13 ... 158 В°F)
Mechanical specifications
Connection type		Connector M8 x 1 , 3-pin
Housing material		Polyamide (PA)
Protection degree		IP67
Mass		20 g
Note		Use a stop screw combined with a model -F2 sensor from Pepperl+Fuchs GmbH. The maximum actuation speed of the control slide is 0.1 m/s

Назад в раздел