ГлавнаяКаталогPepperl-FuchsIndustrial SensorsProximity SensorsInductive Sensors
 

Inductive sensor | NJ10-30GM50-E2-3G-3D

Артикул: NJ10-30GM50-E2-3G-3D
Наименование: Inductive sensor | NJ10-30GM50-E2-3G-3D
Производитель: Pepperl-Fuchs


  • 10 mm flush
  • ATEX-approval for zone 2 and zone 22

Datasheet as PDF in following languages:


Technical Data: NJ10-30GM50-E2-3G-3D

General specifications
Switching element functionPNP NO
Rated operating distance10 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 8.1 mm
Reduction factor rAl 0.32
Reduction factor rCu 0.32
Reduction factor r304 0.72
Reduction factor rBrass 0.43
Nominal ratings
Operating voltage10 ... 60 V DC
Switching frequency0 ... 650 Hz
Hysteresis1 ... 15 typ. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2.8 V
Operating current0 ... 200 mA
Off-state current0 ... 0.5 mA typ. 0.01 mA
No-load supply current≤ 9 mA
Switching state indicationLED, yellow
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross-section0.75 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Housing diameter30 mm
Protection degreeIP67
General information
Use in the hazardous areasee instruction manuals
Category3G; 3D

Назад в раздел