Inductive sensor | NJ2-14GM-N-V1-Y19784
Артикул: NJ2-14GM-N-V1-Y19784
Наименование: Inductive sensor | NJ2-14GM-N-V1-Y19784
Производитель: Pepperl-Fuchs
|
|
Datasheet as PDF in following languages: Technical Data: NJ2-14GM-N-V1-Y19784| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 2 mm | | Installation | flush | | Output polarity | NAMUR | | Assured operating distance | 0 ... 1.62 mm | | Reduction factor rAl | 0.4 | | Reduction factor rCu | 0.3 | | Reduction factor r304 | 0.85 | | Nominal ratings | | Nominal voltage | 8 V | | Switching frequency | 0 ... 2000 Hz | | Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Functional safety related parameters | | MTTFd | 11770 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Housing material | Stainless steel 1.4305 / AISI 303 | | Sensing face | PPS | | Housing diameter | 14 mm | | Protection degree | IP67 | | General information | | Use in the hazardous area | see instruction manuals | | Category | 2G |
|
Назад в раздел
|
