Inductive sensor | NJ2-FD1-E2-1.875-V1-T
Артикул: NJ2-FD1-E2-1.875-V1-T
Наименование: Inductive sensor | NJ2-FD1-E2-1.875-V1-T
Производитель: Pepperl-Fuchs
|
|
- 3-wire DC
- Weld Immune
- Sensing range 2 mm
- 5000 psi rating
- High temperature model
Datasheet as PDF in following languages: Technical Data: NJ2-FD1-E2-1.875-V1-T| General specifications | | Switching element function | PNP NO | | Rated operating distance | 2 mm | | Installation | flush | | Output polarity | DC NO | | Assured operating distance | 0 ... 1.62 mm | | Reduction factor rAl | 0.4 | | Reduction factor r304 | 0.85 | | Nominal ratings | | Operating voltage | 10 ... 30 V DC | | Switching frequency | ≤ 250 Hz | | Hysteresis | 10 ... 20 % 15 typ. | | Short-circuit protection | yes | | Voltage drop |
≤ 2 V | | Operating current | ≤ 100 mA | | Off-state current | < 100 µA | | No-load supply current |
≤ 35 mA | | Mag. Field strength, AC fields | 250 mT | | Mag. Field strength, DC fields | 100 mT | | Limit data | | Operating pressure dynamically | 5000 psi | | Indicators/operating means | | LED green | Power on | | LED yellow | Output status | | Standard conformity | | Standards | EN 60947-5-2 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) on probe
-25 ... 85 В°C (-13 ... 185 В°F) on sensor | | Mechanical specifications | | Protection degree | IP67 | | Material | Housing: zinc
Probe: stainless steel
Flange: steel | | Note | X = 1.875 in (47.6 mm)
|
|
Назад в раздел
|
