Inductive sensor | NJ2-N-H42
Артикул: NJ2-N-H42
Наименование: Inductive sensor | NJ2-N-H42
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 2 mm flush
- Compression proof up to 350 bar, dynamic on active surface
Datasheet as PDF in following languages: Technical Data: NJ2-N-H42| General specifications | | Switching element function | NAMUR, NC | | Rated operating distance | 1.5 mm | | Installation | flush | | Output polarity | DC | | Assured operating distance | 0 ... 1.22 mm | | Reduction factor rAl | 0.4 | | Reduction factor rCu | 0.3 | | Reduction factor r304 | 0.85 | | Nominal ratings | | Nominal voltage | 8 V | | Switching frequency | 0 ... 400 Hz | | Hysteresis | typ. 5 % | | Current consumption | | | Measuring plate not detected | min. 3 mA | | Measuring plate detected | ≤ 1 mA | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Mechanical specifications | | Connection type | connector, ZH 630 603 00
Socket, ZH 632 603 00 | | Housing material | Stainless steel 1.4305 / AISI 303 | | Sensing face | Ceramic | | Housing diameter | 18 mm | | Protection degree | IP50 |
|
Назад в раздел
|
