Inductive sensor | NJ20P+U4+A2-V1
Артикул: NJ20P+U4+A2-V1
Наименование: Inductive sensor | NJ20P+U4+A2-V1
Производитель: Pepperl-Fuchs
|
|
- Only for non-ferrous metals
- 20 mm non-flush
- 4-wire DC
Datasheet as PDF in following languages: Technical Data: NJ20P+U4+A2-V1| General specifications | | Switching element function | PNP NO/NC | | Rated operating distance | 20 mm | | Installation | non-flush | | Output polarity | DC | | Assured operating distance | 0 ... 16.2 mm | | Reduction factor rAl | 1 | | Reduction factor rCu | 1 | | Reduction factor rSt37 | 0 | | Reduction factor rBrass | 1 (Minimum distance: 2 mm) | | Nominal ratings | | Operating voltage | 10 ... 30 V DC | | Switching frequency | 0 ... 200 Hz | | Hysteresis | 1 ... 10 typ. 5 % | | Reverse polarity protection | reverse polarity protected | | Short-circuit protection | pulsing | | Voltage drop | ≤ 3 V | | Operating current | 0 ... 200 mA | | No-load supply current | ≤ 20 mA | | Operating voltage display | LED, green | | Switching state indication | LED, yellow | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Connection type | Connector M12 x 1 , 4-pin | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP68 |
|
Назад в раздел
|
