Inductive sensor | NJ30P+U1+1N
Артикул: NJ30P+U1+1N
Наименование: Inductive sensor | NJ30P+U1+1N
Производитель: Pepperl-Fuchs
|
|
- Comfort series
- 30 mm non-flush
- Only for non-ferrous metals
Datasheet as PDF in following languages: Technical Data: NJ30P+U1+1N| General specifications | | Switching element function | NAMUR, NO | | Rated operating distance | 30 mm | | Installation | non-flush | | Output polarity | NAMUR | | Assured operating distance | 1 ... 24.3 mm | | Reduction factor rAl | 1 | | Reduction factor rCu | 1 | | Reduction factor rSt37 | 0 | | Reduction factor rBrass | 1 | | Nominal ratings | | Nominal voltage | 8 V | | Switching frequency | 0 ... 150 Hz | | Current consumption | | | Measuring plate not detected | max. 1 mA | | Measuring plate detected | min. 3 mA | | Functional safety related parameters | | MTTFd | 8815 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Compliance with standards and directives | | Standard conformity | | | NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 | | Approvals and certificates | | UL approval | cULus Listed, General Purpose | | CSA approval | cCSAus Listed, General Purpose | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Mechanical specifications | | Connection type | screw terminals | | Core cross-section | up to 2.5 mm2 | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP68 | | General information | | Use in the hazardous area | see instruction manuals | | Category | 2G |
|
Назад в раздел
|
