Inductive sensor | NJ40+U2+N

Артикул: NJ40+U2+N
Наименование: Inductive sensor | NJ40+U2+N
Производитель: Pepperl-Fuchs

General specifications
Switching element function		NAMUR, NC
Rated operating distance		40 mm
Installation		non-flush
Output polarity		NAMUR
Assured operating distance		0 ... 32.4 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Nominal ratings
Nominal voltage		8 V
Switching frequency		0 ... 100 Hz
Current consumption
	Measuring plate not detected	min. 3 mA
	Measuring plate detected	≤ 1 mA
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
FM approval
	Control drawing	116-0165F
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 100 В°C (-13 ... 212 В°F)
Mechanical specifications
Connection type		screw terminals
Core cross-section		up to 2.5 mm²
Housing material		PBT
Sensing face		PBT
Protection degree		IP68
General information
Use in the hazardous area		see instruction manuals
	Category	2G

Назад в раздел