Inductive sensor | PL1-F25-B3-K
Артикул: PL1-F25-B3-K
Наименование: Inductive sensor | PL1-F25-B3-K
Производитель: Pepperl-Fuchs
|
|
- For installation in housing
- PL1... with valve connection
- 4-way LED indicator
- Satisfies machinery directive
- Lead breakage and short-circuit monitoring of the valve
- After an AS-interface communication error the valve voltage falls
Datasheet as PDF in following languages: Technical Data: PL1-F25-B3-K| Product Description | | Valve positioner and valve control module | | General specifications | | Switching element function | programmable | | Rated operating distance | 3 mm | | Installation | flush mountable | | Output polarity | AS-Interface | | Assured operating distance | 0 ... 2.43 mm | | Reduction factor rAl | 0.5 | | Reduction factor r304 | 1 | | Reduction factor rSt37 | 1.1 | | Slave type | Standard slave | | AS-Interface specification | V2.1 | | Required master specification | ≥ V2.1 | | Nominal ratings | | Operating voltage | 26.5 ... 31.9 V via AS-Interface network | | Switching frequency | 0 ... 100 Hz | | Reverse polarity protection | reverse polarity protected | | Operating current | 100 mA | | Indicators/operating means | | LED POWER | AS-Interface voltage; LED green | | LED IN | switching state (input); LED yellow | | LED OUT | binary LED yellow/red
yellow: switching state
red: lead breakage/short-circuit | | Ambient conditions | | Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) | | Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) | | Mechanical specifications | | Connection (system side) | 4-pin CombiCon connector | | Connection (valve side) | 2-pin CombiCon connector | | Housing material | PBT | | Sensing face | PBT | | Protection degree | IP00 | | Note | The valve voltage is limitedof max. 26.4 V; valve power max. 2.1 W |
|
Назад в раздел
|
