Inductive sensor | NBN4-12GM40-E2-T-V1
Артикул: NBN4-12GM40-E2-T-V1
Наименование: Inductive sensor | NBN4-12GM40-E2-T-V1
Производитель: Pepperl-Fuchs
|
|
- 4 mm non-flush
- Short version
- Extended temperature range
Datasheet as PDF in following languages: Technical Data: NBN4-12GM40-E2-T-V1| General specifications | | Switching element function | PNP NO | | Rated operating distance | 4 mm | | Installation | non-flush | | Output polarity | DC | | Assured operating distance | 0 ... 3.24 mm | | Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
12 mm x 12 mm x 1 mm | | Reduction factor rAl | 0.5 | | Reduction factor rCu | 0.4 | | Reduction factor r304 | 0.8 | | Reduction factor rBrass | 0.5 | | Nominal ratings | | Installation conditions | | | A | 8 mm | | B | 9 mm | | C | 8 mm | | F | 27 mm | | Operating voltage | 10 ... 30 V | | Switching frequency | 0 ... 800 Hz | | Hysteresis | 0.03 ... 0.88 mm | | Reverse polarity protection | yes | | Short-circuit protection | yes | | Overload resistance | yes | | Wire breakage protection | yes | | Inductive overvoltage protection | yes | | Surge suppression | yes | | Ripple | 10 % | | Voltage drop | ≤ 2.5 V | | Repeat accuracy | 0.2 mm | | Operating current | 0 ... 200 mA | | Off-state current | ≤ 0.01 mA | | No-load supply current | ≤ 7 mA | | Switching state indication | all direction LED, yellow | | Functional safety related parameters | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 0 % | | Approvals and certificates | | CCC approval | CCC approval / marking not required for products rated ≤36 V | | Ambient conditions | | Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) | | Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) | | Mechanical specifications | | Connection type | connector M12 x 1, 4-pin | | Housing material | brass, nickel-plated | | Sensing face | PBT | | Housing diameter | 12 mm | | Protection degree | IP67 | | Mass | 12 g |
|
Назад в раздел
|
