Solenoid Driver | HiD2871
Артикул: HiD2871 Solenoid Driver | HiD2871 Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com
1-channel isolated barrier 24 V DC supply (bus or loop powered) Output 40 mA at 12 V DC, 60 mA current limit Contact or logic control input Low current output for LEDs Up to SIL2 acc. to IEC 61508 (bus powered) Up to SIL3 acc. to IEC 61508 (loop powered)
Datasheet as PDF in following languages:
Technical Data: HiD2871 General specifications Signal type Digital Output Supply Connection SL1: 1a(-), 1b(-); 2a(+), 2b(+) Rated voltage 20.4 ... 30 V via Termination Board Input Connection SL1: 8a(+), 7a(-); 8b(+), 7b(-) Control input voltage free contact or open collector Input current 20 mA with open output Power loss 1.2 W at 24 V, 300 Ω load Inrush current 1 A , 0.5 ms loop powered Output Connection SL2: 5a(+), 5b(-), 7a(+) Output voltage 40 mA at 12 V DC, 60 mA current limit Switching frequency max. 50 Hz Response time turn-on time 1 ms, turn-off time 8 ms, at 300 Ω load Directive conformity Electromagnetic compatibility Directive 2004/108/EC EN 61326-1:2006 Conformity Electromagnetic compatibility NE 21:2006 Protection degree IEC 60529 Ambient conditions Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Mechanical specifications Protection degree IP20 Mass approx. 140 g Dimensions 18 x 106 x 128 mm (0.7 x 4.2 x 5 in) Mounting on Termination Board Data for application in connection with Ex-areas EC-Type Examination Certificate CESI 02 ATEX 086 , for additional certificates see www.pepperl-fuchs.com Group, category, type of protection Directive conformity Directive 94/9/EC EN 60079-0:2009, EN 60079-11:2007 , EN 60079-26:2007 , EN 61241-11:2006 International approvals CSA approval Control drawing 366-005CS-12B (cCSAus)
Назад в раздел
II (1)G [Ex ia Ga] IIC , 
