Solenoid Driver | HiD2873
Артикул: HiD2873
Наименование: Solenoid Driver | HiD2873
Производитель: Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com
1-channel isolated barrier 24 V DC supply (bus powered) Output 40 mA at 12 V DC, 52 mA current limit Contact or logic control input Line fault detection (LFD)
Datasheet as PDF in following languages:
Technical Data: HiD2873 General specifications Signal type Digital Output Supply Connection SL1: 1a(-), 1b(-); 2a(+), 2b(+) Rated voltage 20.4 ... 30 V via Termination Board Input current 65 mA at 24 V, 300 Ω load Power loss 1.1 W at 24 V, 300 Ω load Input Connection SL1: 8a(+), 7a(-) Control input external switch (dry contact or open collector) non isolated or logic signal input fully floating Operating mode output on with contact close or transistor on or logic level > 4 V output off with contact open or transistor off or logic level < 1.5 V Output Connection SL2: 5a(+), 5b(-) Output voltage 40 mA at 12 V DC, 52 mA current limit Load 0.1 ... 5 kΩ Switching frequency max. 250 Hz Response time turn-on time 1 ms, turn-off time 2 ms, at 300 Ω load Error message output Connection SL1: 6b Output type open collector transistor (internal fault bus) Fault current 4 mA typical Fault level lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical Directive conformity Electromagnetic compatibility Directive 2004/108/EC EN 61326-1:2006 Conformity Electromagnetic compatibility NE 21:2006 For further information see system description. Protection degree IEC 60529 Ambient conditions Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Mechanical specifications Protection degree IP20 Mass approx. 140 g Dimensions 18 x 106 x 128 mm (0.7 x 4.2 x 5 in) Mounting on Termination Board Data for application in connection with Ex-areas EC-Type Examination Certificate CESI 02 ATEX 086 , for additional certificates see www.pepperl-fuchs.com Group, category, type of protection II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIICDirective conformity Directive 94/9/EC EN 60079-0:2009, EN 60079-11:2007 , EN 60079-26:2007 , EN 61241-11:2006 International approvals CSA approval Control drawing 366-005CS-12B (cCSAus)
Назад в раздел