ГлавнаяКаталогPepperl-FuchsProcess InterfacesIsolated BarriersH-SystemModulesSolenoid Drivers
 

Solenoid Driver | HiD2877

Артикул: HiD2877
Наименование: Solenoid Driver | HiD2877
Производитель: Pepperl-Fuchs


Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com
  • 1-channel isolated barrier
  • 24 V DC supply (bus powered)
  • Output 40 mA at 11.2 V DC, 52 mA current limit
  • Contact or logic control input
  • Entity parameter Io/Isc = 93 mA
  • Line fault detection (LFD)

Datasheet as PDF in following languages:


Technical Data: HiD2877

General specifications
Signal typeDigital Output
Supply
ConnectionSL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage20.4 ... 30 V via Termination Board
Input current60 mA at 24 V, 300 Ω load
Power loss1 W at 24 V, 300 Ω load
Input
ConnectionSL1: 8a(+), 7a(-)
Control inputexternal switch (dry contact or open collector) non isolated or logic signal input fully floating
Operating modeoutput on with contact close or transistor on or logic level > 4 V
output off with contact open or transistor off or logic level < 1.5 V
Output
ConnectionSL2: 5a(+), 5b(-)
Output voltage40 mA at 11.2 V DC, 52 mA current limit
Load0.1 ... 5 kΩ
Switching frequencymax. 250 Hz
Response timeturn-on time 1 ms, turn-off time 2 ms, at 300 Ω load
Error message output
ConnectionSL1: 6b
Output typeopen collector transistor (internal fault bus)
Fault current4 mA typical
Fault levellead short-circuit detection at < 25 Ω
lead breakage detection at > 100 kΩ typical
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Conformity
Electromagnetic compatibilityNE 21:2006
For further information see system description.
Protection degreeIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Protection degreeIP20
Massapprox. 140 g
Dimensions18 x 106 x 128 mm (0.7 x 4.2 x 5 in)
Mountingon Termination Board
Data for application in connection with Ex-areas
EC-Type Examination CertificateCESI 02 ATEX 086 , for additional certificates see www.pepperl-fuchs.com
Group, category, type of protectionEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC
Directive conformity
Directive 94/9/ECEN 60079-0:2009, EN 60079-11:2007 , EN 60079-26:2007 , EN 61241-11:2006
International approvals
CSA approval
Control drawing366-005CS-12B (cCSAus)

Назад в раздел